Series f4, Watlow, Iso 9001 – Watlow Series F4S/D User Manual
Page 139: Declaration of conformity
![background image](/manuals/359283/139/background.png)
Wa t l o w S e r i e s F 4 S / D
A p p e n d i x
■
A . 5
Series F4
Watlow
an
ISO 9001
approved facility since 1996.
1241 Bundy Blvd.
Winona, MN 55987 USA
Declares that the following product:
Designation:
Series F4
Model Numbers: F4 (S, D or P) (H or L) – (C, E, F or K) (A, C, E, F or K) (A, C, F or K) (A, C, F, K, 0 or
6) – (0, 1 or 2) (Any three numbers of letters)
Classification:
Temperature control, Installation Category II, Pollution degree 2 continuous
unmonitored operation, IP65 Front panel
Rated Voltage:
100 to 240 V~ (ac) or 24 to 28 V (ac or dc), 50/60 Hz
Rated Power:
39 VA maximum
Meets the essential requirements of the following European Union Directives by using the relevant
standards show below to indicate compliance.
2004/108/EC Electromagnetic Compatibility Directive
EN 61326-1
2005
Electrical equipment for measurement, control and
laboratory use – EMC requirements (Industrial Immunity,
Class A* Emissions).
EN 61000-4-2
1996
+ A1,A2
Electrostatic Discharge Immunity
EN 61000-4-3
2006
Radiated Field Immunity
EN 61000-4-4
2004
Electrical Fast-Transient / Burst Immunity
EN 61000-4-5
2006
Surge Immunity
EN 61000-4-6
1996
+ A1,A2,A3 Conducted Immunity
EN 61000-4-11
2004
Voltage Dips, Short Interruptions and Voltage Variations
Immunity
EN 61000-3-2
2006
Harmonic Current Emissions
EN 61000-3-3
2005
Voltage Fluctuations and Flicker
SEMI F47
2000
Specification for Semiconductor Sag Immunity Figure R1-1
*NOTE: Not appropriate for use in commercial or residential applications without additional filtering.
2006/95/EC Low-Voltage Directive
EN 61010-1
2001
Safety Requirements of electrical equipment for measure-
ment, control and laboratory use. Part 1: General
requirements
Per
2002/96/EC WEEE Directive
Please Recycle Properly
These devices contain lead solder and are not RoHS compliant.
They are a Control Devices and fall outside the scope of 2002/95/EC Directive.
Raymond D. Feller III
Winona, Minnesota, USA
Name of Authorized Representative
Place of Issue
General Manager
February 2009
Title of Authorized Representative
Date of Issue
Signature of Authorized Representative
Declaration of Conformity