Watlow CPC400 - Manual (Page 22)

Chapter 1: System Overview CPC400 Series User’s Guide
8 Watlow Anafaze Doc. 0600-2900-2000
TB50
The TB50 is a screw-terminal interface for control wiring.
It allows you to connect relays, encoders and discrete I/O
devices to the CPC400. The screw terminal blocks accept
wires as large as 18 AWG (0.75 mm
2
). A 50-pin SCSI cable
connects the TB50 to the CPC400.
Figure 1.5 TB50
CPC400 Cabling
Watlow Anafaze provides cables required to install the
CPC400. A 50-pin SCSI cable connects the TB50 to the
CPC400.
The optional cable used to connect the CPC400 to a comput-
er using EIA/TIA-232 communications has a DB-9 or DB-
25 connector for the computer and bare wires for connect-
ing to the CPC400.