Watlow CPC400 - Manual (Page 194)

Chapter 7: Specifications CPC400 Series User’s Guide
180 Watlow Anafaze Doc. 0600-2900-2000
Dual DAC Analog Outputs
Table 7.30 Dual DAC Specifications by Output
Range
Serial DAC Specifications
Watlow Anafaze offers a Serial DAC for precision open-loop
analog outputs. The Serial DAC is jumper-selectable for a
0 to 10V
Î (dc) or 4 to 20 mA output. Multiple Serial DAC
modules can be used with one CPC400. The Serial DAC
carries a CE mark.
Table 7.31 Serial DAC Environmental Specifi-
cations
Table 7.32 Serial DAC Physical Specifications
Version 4 to 20 mA 0 to 5V 0 to 10V Units
Gain Accuracy ± 6 ± 6 ± 6 percent
Output Offset ± 0.75 ± 0.75 ± 0.75
percent of full
scale range
Ripple 1.6 1.6 1.6
percent of full
scale range
Response Time 2 2 2 seconds
Maximum Current Output 20 10 10 mA Î (dc)
Load Resistance (12V) 250 maximum 500 minimum 1000 minimum Ohms
Load Resistance (24V) 850 maximum n/a n/a Ohms
Storage Temperature -20 to 60°C
Operating Temperature 0 to 70°C
Humidity 10 to 95% non-condensing
Weight 0.76 lb. 0.34 kg
Length 5.4 inches 137 mm
Width 3.6 inches 91 mm
Height 1.8 inches 44 mm