Watlow CPC400 - Manual (Page 190)

Chapter 7: Specifications CPC400 Series User’s Guide
176 Watlow Anafaze Doc. 0600-2900-2000
Table 7.21 CPC400 Serial Interface
Table 7.22 CPC400 Power
CPC400 Power Supply
These specifications are for the power supply typically
shipped. If that power supply is not available, a similar
power supply may be substituted. If the dimensions or oth-
er specifications deviate significantly, the shipment will in-
clude updated specifications.
Table 7.23 Power Supply Environmental
Specifications
Table 7.24 Power Supply Agency Approvals /
Compliance
Type EIA/TIA-232 3-wire or EIA/TIA-485 4-wire
Isolation 530V Å (ac)
Baud Rate 2400, 9600 or 19200, user selectable
Error Check Cyclic redundancy check (CRC)
Number of Controllers
1 with EIA/TIA-232 communications
Up to 32 with EIA/TIA-485 communications
Protocol Modbus RTU
Voltage 12 to 24V Î (dc) +/-15%
Maximum Current 1 A
Power Common to Frame Ground
Maximum Potential
40V
Storage Temperature -20 to 60°C
Operating Temperature 0 to 50°C
Humidity 10 to 95% non-condensing
CE Directive LVD 93/68 EEC