Watlow CPC400 - Manual (Page 108)

Chapter 5: Menu and Parameter Reference CPC400 Series User’s Guide
94 Watlow Anafaze Doc. 0600-2900-2000
Overview of the Setup Menus
The CPC400 has eleven setup menus. Table 5.2 provides a
brief description of each menu. Figure 5.2 lists all of the
menus and parameters in the same order that they appear
in the controller.
Table 5.2 CPC400 Setup Menus
Menu Description
Page
Number
Global setup Configure global settings, which affect all loops. 96
Input Configure the input for each loop. 104
Channel Configure each PV source and Channel Name 109
Control Configure PID control for each loop. 111
Output Configure heat and cool outputs for each loop. 116
Alarms Configure alarms for each loop. 121
PV retrans Configure process variable retransmit. 125
Cascade Configure cascade control. 127
Ratio Configure ratio control. 128
Soft integers
Pass integer data (-32768 to 32767) between a LogicPro logic
program and the operator.
130
Soft Booleans
Pass Boolean data (0 or 1) between a LogicPro logic program
and the operator.
131
I/O test Perform tests of the digital inputs, digital outputs and keypad. 131