Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 64)

Chapter 3 Part Names and Functions
3-19
N: Serial Interface (COM1)
RS232C/RS422/RS485 serial interface. D-sub 9-pin plug type connector. Communication method is switched
via software.
O: Serial Interface (COM2)
RS422/RS485 serial interface. D-sub 9-pin socket type connector.
P: Dip Switches
Dip
Switches
Function ON OFF Note
1
CF Card Startup Settings
(Controls unit startup
from the CF Card.)
Startup from CF
Card is enabled.
Startup from CF
Card is
disabled. CF Card with
startup data
required.
2
*1
*1 When power supply is turned ON at dip switch 2 is ON, it starts with Transfer Mode. Usually,
use it in OFF.
Forced Transfer Mode
Forced Transfer
Mode: ON Forced Transfer
Mode: OFF
-
3 Booking - - Constantly OFF
4
This setting controls the
forced closing of the CF
Card cover.
Forced close
enabled. Forced close
disabled.
Used when CF
Card cover is
damaged.
1 2 3 4
ON