Proface GP4600R - 12.1 Standard HMIs with Rear Mounting Options" - Manual

Screen Protection Sheet Attachment Instructions
Thank you for purchasing the Screen Protection Sheet (5 sheets per set).
Please read the following instructions prior to attaching this sheet to the screen.
Package Contents: (1) Screen Protection Sheet Attachment (5 sheets per set)
(2) Screen Protection Sheet Attachment Instructions (This page)
• This sheet is designed specifically to protect the screen from moisture, liquids and dirt.
• This sheet's matte finish helps to reduce glare and Newton rings (screen curve reflection lines).
• This sheet does not interfere in any way with the Touch Panel's normal touch operation.
• When dirt and smudges on the sheet begin to reduce the screen's visibility, please replace
the sheet with a new one.
• In operating environments with high levels of humidity and moisture, con-
densation or mist may form between the sheet and the unit’s screen.
• This sheet is made from flexible polyester, and is not designed to protect
against sharp or hard objects. (i.e. it may tear if struck by a sharp object)
• When dispoisng off this sheet,be sure to do so according to your country’s
standards for industrial waste disposal.
NOTICE
DAMAGE OF TOUCH PANEL
• If the sheet should start to peel away from the screen, DO NOT use a
sharp or hard object (i.e. a knife, or pin) to remove the sheet, since it could
scratch or damage the screen.
Failure to follow these instructions can result in equipment damage.
To Attach the Sheet
1. Prior to attaching the sheet, please clean the screen thoroughly with a soft cloth. (Use either
water or a neutral detergent to remove tougher stains)
2. Remove the sheet's Protective Film, and peel off the Backing Sheet slightly to expose the
Protection Sheet's adhesive surface.
3. Starting at the top of the screen, slowly attach the Protection Sheet while peeling off the
Backing Sheet.
Backing Sheet
Protective Film
• Be sure completely to peel off the Protection Sheet’s Protective Film.
Protection Sheet Specifications/Characteristics
© 2011 Digital Electronics Corporation
Polyester Film
Protects Against
Hexane, Kerosene, Engine Oil, Diesel Oil, Lubrication Oil,
Glycerine, Acetone, Acetic Anhydride, Benzene
Does Not
Protect Against Ammonia, Sulfur Dioxide, Potassium Hydroxide,
Caustic Soda, Nitrobenzene
Chemical
Resistance
Level
Sheet Material
Protection Sheet
Digital Electronics Corporation shall not be held responsible for any damages, losses
or third-party claims resulting from the use of this product.
Notice