Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 57
GP3000 Series Hardware Manual
3-12
M: CF Card Access LED
This lamp light up when CF card is inserted and
CF card cover is closed. However, opening the CF
card cover, in the CF card while accessing it
continues to light up.
N: Power Input Terminal Block (AC model),
Power Plug Connector (DC model)
O: CF Card Cover
The CF Card I/F and Dip Switches are located in
the CF Card Cover open. This cover must be
closed when accessing the CF Card.
P: Audio Input Interface (L-IN/MIC) (AGP-3550T/AGP-3560T only)
This interface connects a microphone.
Use for mini jack connector (
Φ 3.5mm).
Q: Video Input Interface (V-IN) (AGP-3550T/AGP-3560T only)
This interface connects a video camera. Supports NTSC (59.9Hz) / PAL (50Hz) formats. Use for RCA
Connector (75
Ω).
R: Serial Interface (COM1)
RS232C/RS422/RS485 serial interface. D-sub 9-pin plug type connector. Communication method is switched
via software.
S: Serial Interface (COM2)
RS422 /RS485 serial interface. D-sub 9-pin socket type connector.
Access Lamp
Indicates
Green ON
The CF Card is inserted
and the CF Card Cover
is closed. Or, the CF
Card is being accessed.
Green OFF
The CF Card is not
inserted or is not being
accessed.
•
Do not remove or insert the CF
Card when the LED lamp is on.
Doing so may damage data on the
CF Card.
J
I
M
S
R
N
O
Q
N
O
R
S
Q
P
K
T
Back
(AGP-35*0T)
Bottom
(AGP-35*0T)
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"