Proface AGP3500 - 10.4 DIO HMI" - Manual

1
Thank you for purchasing the EX Module (hereafter referred to as the “this unit”) for the
Pro-face’s LT3000 Series. This unit is intended for use with expansion I/O module designed
for the LT3000 Series Graphical Logic Controller unit (hereby referred to as “LT”) or with
Remote I/O unit (GP3000 Series CANopen board type).
Before actually beginning to use this product, please be sure to read through this manual and
other related manuals to fully understand all the settings and functions.
©2007 Copyright Digital Electronics Corporation. All rights reserved.
Product names used in this manual are the trademarks / registered trademarks of their
respective owners.
NOTICE
1. Copying this manual’s contents, either in whole or in part, is prohibited without the
express permission of Digital Electronics Corporation, Japan.
2. The information contained in this manual is subject to change without notice.
3. If you should you find any errors or omissions in this document, please contact
Digital Electronics Corporation to report your findings.
4. Regardless of Clause 3 above, Digital Electronics Corporation shall not be held
responsible for any damages, losses or third-party damages resulting from the use of
this product.