Proface LT3200 - 3.8 All-in-One HMI" - Manual

-1-
ABL-DRM03024 Installation Guide
This guide contains a variety of safety markings related to safe and correct opera-
tion of the ABL-DRM03024. Be sure to read this guide carefully to fully under-
stand how to correctly use this product’s features.
„ Safety Symbols
This guide uses the following symbols for important information related to safe
and correct operation of this product. Please pay attention to these symbols and
follow the instructions given.
Safety symbols and their meanings:
Safety Precautions
DANGER
A hazardous situation that will result in serious
injury or even death if instructions are not followed.
WARNING
A potentially hazardous situation that could result in serious
injury or even death if instructions are not followed.
CAUTION
A potentially hazardous situation that could result in
minor injury or equipment damage if instructions are
not followed.
Thank you for purchasing Pro-face’s ABL-DRM03024. To ensure correct use of
this product’s features, be sure to read this Installation Guide.
• There is a dangerous voltage inside the ABL-DRM03024.
• Any utilisation or intervention which does not comply with codes of practice can result in death,
serious physical injury or irreparable damage to equipment.
• Before any intervention, the main circuit breaker must be opened and secured against any inad-
vertent closing.Then wait at least 5 minutes before opening the ABL-DRM03024.
• This product is designed to be a general-purpose device for general industries, and is neither
designed nor produced to be used with equipment or systems in potentially life-threatening situa-
tions. If you are considering using this product for special uses, including nuclear power control
devices, electric power devices, aerospace equipment, medical life support equipment, or trans-
portation vehicles, please contact your local ABL-DRM03024 distributor.
DANGER