1 inserting the cf card, 2 removing the cf card, 1 inserting the cf card -19 – Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 190: 2 removing the cf card -19
Chapter 8 Installation and Wiring
8-19
8.3.1
Inserting the CF Card
Use the following steps to insert the CF Card in the GP.
(1)
Pull the CF Card Cover frontward and then open it upward.
(2)
Insert the CF Card in the CF Card Slot, until the eject button is pushed forward.
(3)
Close the cover. (As shown.)
8.3.2
Removing the CF Card
Simply reverse the steps shown in the previous “Inserting CF Card” explanation. Prior to pressing the eject
button to remove the CF Card, confirm that the CF Card Access LED is turned OFF.
•
Make sure that the CF Card cover is closed only accessing the CF Card.
Eject Button
This manual is related to the following products:
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"