Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 32
Chapter 1 System Design
1-11
Edit Mode Peripherals
*1
*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!” (http://www.pro-face.com/
otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help (H)] menu-[Connect to Support Site
“Otasuke Pro!” (C)] command.
*2
The RS-232C Isolation Unit does not correspond to RS-422/485 (2 wire) communication.
*3
The RS-232C Isolation Unit does not correspond to Serial Multilink communication.
*4
For details regarding connection methods, be sure to read “Transferring Projects and Data” under
“COM Transfer Connections” in the GP-Pro EX Reference Manual.
*5
Certain types and models of PCs cannot be used.
GP Interfaces
(1) USB Host Interface
SEE
GP-Pro EX Reference Manual
GP Unit
(1)
USB Transfer Cable
CA3-USBCB-01
USB Port
Screen Editor
Software
GP-Pro EX
Personal Computer
*5
(Commercial type)
USB Memory Strage
*1
(Commercial type)
USB-Serial (RS-232C)
Conversion Cable
CA6-USB232-01
RS-232C Cable
*4
(Prepared by user)
Modem
*1
(Commercial type)
Serial Port
Telephone lines
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"