Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 164)

Chapter 6 FLEX NETWORK Connector
6-3
6.1.2 Flex Network Data Transfer Settings
6.2 Wiring to the FLEX NETWORK Connector
6.2.1 FLEX NETWORK Communication Cable
Use the following FLEX NETWORK Communication Cable when connecting to the FLEX NETWORK
Unit.
Communication Type 1:N
Connection Method Multi Drop
Transfer Distance At 6Mbps 200m per CH, at 12Mbps100m per CH
Transfer Method During cyclic period, distributed transmission, Half-duplex
Transfer Speed 6Mbps, 12Mbps
Transfer I/F Differential method, Pulse transfer resistance
Error Check Format check, bit check, CRC-12 check
No. of Stations
63 stations max., Bit variable input: 512 points
*1
, Bit variable output:
512 points
*1
, Integer variable input: 128 points
*2
, Integer variable
output: 128 points
*2
(depending on type of units used.)
*1 When using GP-Pro EX under Ver.2.50, Bit variable enables to input/output 256 points.
*2 When using GP-Pro EX under Ver.2.50, Integer variable enables to input/output 64 points.
• For details about the FLEX NETWORK, refer to the user manual for the respective FLEX NET-
WORK product.
Model Length per Unit
FN-CABLE2010-31-MS 10m
FN-CABLE2050-31-MS 50m
FN-CABLE2200-31-MS 200m