Proface LT3300 - 5.7 All-in-One HMI" User Manual
Protection sheet specifications/characteristics
Screen Protection Sheet Attachment Instructions
Thank you for purchasing the Screen Protection Sheet (5 sheets per set).
Please read the following instructions prior to attaching this sheet to the screen.
Package Contents: (1) Screen Protection Sheet Attachment (5 sheets per set)
(Model No.CA6-DFS04-01)
(2) Screen Protection Sheet Attachment Instructions (This page)
• In operating environments with high levels of humidity and moisture, con-
densation or mist may form between the sheet and the unit’s screen.
• This sheet is made from flexible polyester, and is not designed to protect
against sharp or hard objects. (i.e. it may tear if struck by a sharp object)
• If the sheet should start to peel away from the screen, DO NOT use a sharp
or hard object (i.e. a knife, or pin) to remove the sheet, since it could
scratch or damage the screen.
• This sheet is designed specifically to protect the screen from moisture, liquids and dirt.
• This sheet's matte finish helps to reduce glare and Newton rings (screen curve reflection lines).
• This sheet does not interfere in any way with the Touch Panel's normal touch operation.
• When dirt and smudges on the sheet begin to reduce the screen's visibility, please replace
the sheet with a new one.
To Attach the Sheet
1. Prior to attaching the sheet, please clean the screen thoroughly with a soft cloth. (Use either
water or a neutral detergent to remove tougher stains)
2. Remove the sheet's Protective Film, and peel off the Backing Sheet slightly to expose the
Protection Sheet's adhesive surface.
3. Starting at the top of the screen, slowly attach the Protection Sheet while peeling off the
Backing Sheet.
• Be sure completely to peel off the Protection Sheet’s Protective Film.
• Be sure to attach the screen protection sheet so that it covers only the dis-
play area.
Protection Sheet Specifications/Characteristics
© 2006 Digital Electronics Corporation
Polyester Film
Protects Against
Hexane, Kerosene, Engine Oil, Diesel Oil, Lubrication Oil,
Glycerine, Acetone, Acetic Anhydride, Benzene
Does Not
Protect Against
Ammonia, Sulfur Dioxide, Potassium Hydroxide,
Caustic Soda, Nitrobenzene
Chemical
Resistance
Level
Sheet Material
Digital Electronics Corporation shall not be held responsible for any damages, losses
or third-party claims resulting from the use of this product.
Notice
Protective Film
Protection Sheet
Backing Sheet
When the product is disposed of, it should be done so according to your country's regulations for similar
types of industrial waste.