Proface AGP3500 - 10.4 DIO HMI" - Manual

1
Thank you for purchasing the CANopen Master Unit (hereafter referred to as “this unit”) for
the Pro-face’s LT3000 Series. This is an expansion unit intended to add Pro-face's LT3000
Series Graphic Logic Controller (hereafter referred to as “LT”) to the CANopen network to
enable communication with CANopen slaves.
Before actually beginning to use this product, please be sure to read through this manual and
other related manuals to fully understand all the settings and functions.
©2008 Copyright Digital Electronics Corporation. All rights reserved.
Product names used in this manual are the trademarks / registered trademarks of their
respective owners.
NOTICE
1. Copying this manual’s contents, either in whole or in part, is prohibited without the
express permission of Digital Electronics Corporation, Japan.
2. The information contained in this manual is subject to change without notice.
3. Should you find any errors or omissions in this document, please contact Digital
Electronics Corporation to report your findings.
4. Regardless of Clause 3 above, Digital Electronics Corporation shall not be held
responsible for any damages, losses or third-party damages resulting from the use of
this product.