Proface AGP3500 - 10.4 DIO HMI" User Manual
Page 206
Chapter 8 Installation and Wiring
8-35
(6)
Verify the position of the frame for the installation of the Function Expansion Memory.
(7)
Insert the Function Expansion Memory at an angle so it’s base plate locks on to the frame’s tabs. While
pushing the Function Expansion Memory in the tab’s direction, connect to the push-in connector.
(8)
Verify that the Function Expansion Memory is securely attached to the frame.
(9)
Return the rear face cover to the original position, and secure the cover in place using the mounting
screws (6). The necessary torque is 0.5N
•m.
Frame
GP-3500 Series interior
Function Expansion Memory
2
1
This manual is related to the following products:
- AGP3400 - 7.5 DIO HMI" AGP3300 - 5.7 DIO HMI" AGP3600 - 12.1 FLEX Network HMIs" AGP3500 - 10.4 FLEX Network HMI" AGP3400 - 7.5 FLEX Network HMI" AGP3600 - 12.1 CANopen HMI" AGP3500 - 10.4 CANopen HMI" AGP3400 - 7.5 CANOpen HMI" AGP3300 - 5.7 CANopen HMI" AGP3300H - 5.7 Handheld HMIs" AGP3750 - 15 Multi-Media HMI" AGP3650 - 12.1 Multi-Media HMIs" AGP3550 - 10.4 Multi-Media HMIs" AGP3450 - 7.5 Multi-Media HMI" AGP3360 - 5.7 Multi-Media HMI" AST3300 - 5.7 Basic HMI" AST3200 - 3.8 Basic HMI" AGP3600 - 12.1 Standard HMIs" AGP3500 - 10.4 Standard HMIs" AGP3400 - 7.5 Standard HMI" AGP3300 - 5.7 Standard HMI" AGP3200 - 3.8 Standard HMI"