Proface LT3300 - 5.7 All-in-One HMI" - Manual

©2012 Pro-face. All rights reserved. Specifications may change without notice.
Datasheet
TouchPanel
Operation
5.7-inch Monochrome B/W
Stand Alone Graphic Controller
LT-3301
Model: LT3301-L1-D24-K, LT3301-LT-D24-C
All-in-one
model
Built-in
DIO
Expansion
I/O
DC 24V
QVGA
5.7
-inch
Specifications
Model LT3301-L1-D24-K LT3301-L1-D24-C
Graphics Display Resolution QVGA (320 x 240 dots)
Display Type and Size Monochrome B/W LCD (5.7-inch)
Display Colors 16 shades
Display Area 117.2mm[4.61in.] x 88.4mm[3.48in.]
Touch Screen Resistive Film (Analog) Touch Screen
DIO
Input 16 discrete points sink/source-type 24VDC.
Reconfigurable as High Speed counters (up to 4 single phase 100Kpps or 2 double phase
50Kpps), Pulse Catch
Output 16 discrete points sink-type 24VDC.
Reconfigurable as pulse output or PWM (up
to 65KHz per point)
Reconfigurable as pulse output or PWM (up
to 65KHz per point)
16 discrete points source-type 24VDC.
Reconfigurable as pulse output or PWM (up
to 65KHz per point)
USB USB1.1 Host I/F x 1, USB TYPE-A connector
I/O Expansion Mix and Match any three EXM Modules
Input Voltage/Rated Voltage Range 24V DC/ 19.2V DC to 28.8V DC
Power Consumption 27W (max.)
Temperature Operating 0°C (32°F) to 50°C(122°F), Storage -20°C (-4°F) to +60°C (140°F)
Altitude Operation 800hPa to 1114hPa (2000 meters above sea-level and below)
Certifications UL508, ANS/I/SA-12,12,01-2007, CSA-22.2 No. 142-M1987, CSA-22,2 No.213-M1987, CE
marking EN55011, EN61000-6-2. Suitable for use in Class I, Division 2, Groups A, B, C, and D.
Hazardous locations or non hazardous locations.
Humidity - Ambient/Storage 10 to 90% RH (Not condensing, wet bulb temperature: 29°C or less).
Corrosive Gas Free of corrosive gases
Vibration & Shock Resistance IEC61131-2 compliant 5 to 9Hz single-amplitude 3.5mm 9 to 150Hz constant-accelerated velocity 9.8m/s2
X, Y, Z directions for 10 cycle (100 minute)
Rating Equivalent to IP65f NEMA #250 TYPE 4X/13. (front surface when panel is embedded)
Weight Approx. 1.0kg [2.2lb] max. (unit only)
External Dimensions 167.4mm [6.59in.] x 135mm [5.31in.] x 77.6mm [3.07in.]
5.7” Operator Interface Plus Control
Features:
• 5.7-inch (QVGA 320x240) Stand Alone
Graphic Controller
• Ladder logic for simple machine control
• Built-in 16 discrete inputs, 16 outputs and
up to 3 EXM modules
• All-in-one operator interface plus control
solution reduces wiring, system cost,
maintenance cost and space.
• Serial port to communicate to temperature
controllers.
I/O EXPANSION MODULES
Input / Ouput Mixed I/O modules
EXM-DMM8DRT 4-point input sink-source, 4-point relay output
with single common
EXM-DMM24DRF 16-point Inputs / 8-point Relay Output Module
Analog I/O modules
EXM-AMI2HT 2-point analog input type
EXM-ALM3LT 2-point temperature input / 1-point analog type
EXM-AMM3HT 2-point analog input / 1-point analog output type
EXM-AMO1HT 1-point analog output type
EXM-AMI4LT 16-point input and 8-point relay output Module
EXM-ARI8LT 4-point Analog Input Module
EXM-AVO2HT 8-point Pt100/Pt1000 Input Module
EXM-AMM6HT 4-point Analog Input/ 2-point Analog Output Module
For more information see EX-Module Datasheet
Input I/O modules
EXM-DDI8DT 8-point sink/source shared I/O Unit, DC24V
input signal can be connected
EXM-DDI16DT 16-point sink/source shared I/O Unit,
DC24V input signal can be connected
Ouput I/O modules
EXM-DRA8RT 8-point relay output with 2 commons I/O Unit
EXM-DRA16RT 16-point relay output with 2 commons I/O Unit
EXM-DDO8UT 8-point transistor output sink I/O Unit
EXM-DDO16UK 16-point transistor output sink I/O Unit
EXM-DDO8TT 8-point transistor output source I/O Unit
EXM-DDO16TK 16-point transistor output source type I/O unit
Mix and Match Any Three Modules
See EXM Module Datasheet for a full list of I/O expansion modules.
Ro
Powered by