Proface GP4500R - 10.4 Standard HMIs with Rear Mounting Options" - Manual

Datasheet
©2013 Pro-face. All rights reserved. Specifications may change without notice.
10.4" Touch Screen Operator Interface
TouchPanel
Operation
Features:
• Lack of front bezel allows for multiple Rear
Mounting Options
• 65,536 Colors, Clear, Bright, High-Resolution TFT
Display
• Energy Effecient LED Display
• Choice of No Grid Analog or Matrix Touch Panel
for Improved Visibility and Precise Part Placement
• Supports Up to Four Protocol Drivers
Simultaneously
• High Speed Application Transfer, 10 Times Faster
than Conventional Operator Interfaces
• 10/100 Base-T Ethernet, USB, Serial
Communication, and SD Card Interfaces
• High-Definition Part Images and Multi-Language
Support
Specifications
Model PFXGP4501TADR
Graphics Display Resolution 640 x 480 pixels (VGA)
Display Type and Size TFT Color LCD (10.4 inch)
Display Colors 65,536 Colors (no blink), 16,384 (blink)
Display Area W211.2 x H158.4 mm [W8.31 x H6.24 in.]
Touch Screen Resistive film analog 1024 x 1024 resolution
USB USB Type-A (2.0) x 1 , USB mini-B (2.0) x1
SD Card SD Card slot x 1 (maximum 32 GB SD/SDHC Card)
Serial COM1: RS-232C Asynchronous Transmission Data Length: 7 or 8 bit, Parity: none, odd or
even, Stop Bit: 1 or 2 bit, Data Transmission Speed: 2,400 bps to 115.2 kbps, Connector:
D-Sub9 (plug)
GP-4501 COM 2: RS-422/485 Asynchronous Transmission Data Length: 7 or 8 bit Parity: none,
odd or even Stop Bit: 1 or 2 bit Data Transmission Speed: 2,400 bps to 115.2 kbps, 187.5kbps
(MPI) Connector: D-Sub9 (plug)
*GP-4503T: COM 2: RS-485 (isolation) Asynchronous Transmission Data Length: 7 or 8 bit Par-
ity: none, Even or Odd Stop Bit: 1 or 2 bit Data Transmission Speed: 2,400 bps to 115.2 kbps,
187.5 kbps (MPI) Connector: D-Sub9 (socket)
Ethernet Ethernet IEEE802.3i/IEEE802.3u, 10BASE-T/100BASE-TX
Backlight White LED (User nonreplaceable parts. When replacement is required, contact your local
distributor.
Brightness and Contrast Controls 16 levels of adjustment available via touch panel or the software
Programming Memory 32MB FEPROM (GP-Pro EX V3.0 or later)
Backup Memory 512kb SRAM with battery backup
10.4-inch TFT Color Color Rear Moun
Touch Screen Operator Interface
GP-4501TADR
Models: PFXGP4501TADR, PFXGP4501TADRF0C
General Specifications
Model PFXGP4501TADR PFXGP4501TADRF0C
Conformal Coating No Yes
Input Voltage Rated 24Vdc (Limits DC19.2 to 28.8V)
Power Consumption 17 W or less
Ambient Operating Temp. 0°C (32°F) to 55°C (131°F)
Storage Temperature -20 to 60 °C [-4 to 140 °F]
Altitude Endurance 800hPa to 1114hPA (2000 meters or lower)
Certifications CE, UL Listed Cl 1 Div 2 (Cl 1 Div 2 is only available on Rev. B units), RoHS, ABS (American
Bureau of Shipping), DNV (Norway – Marine)
CE, UL Listed Cl 1 Div 2 (Cl 1 Div 2 is only available on Rev. C units/ Rev. B units for PFXGP-
4301TAD), RoHS, ABS (American Bureau of Shipping), DNV (Norway – Marine)
Humidity - Ambient/Storage 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] or less - no condensation.)/ 10 to 90 % RH (Wet bulb temperature: 39 °C [102.2 °F] or less - no condensation.)
Noise Immunity Noise Voltage: 1,500 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns (via noise simulator) Noise Voltage: 1,000 Vp-p, Pulse Duration: 1 µs, Rise Time: 1 ns (via noise simulator)
Cooling Method Natural air circulation
Electrostatic Discharge Immunity Contact Discharge Method: 6 kV (IEC/EN61000-4-2 Level 3)
Vibration Resistance IEC/EN61131-2 compliant, 5 to 9 Hz Single amplitude 3.5 mm [0.14 in.], 9 to 150 Hz Fixed acceleration: 9.8 m/s², X, Y, Z directions for 10 cycles (approx. 100 min)
Shock during operation IEC/EN 61131-2 compliant 147 m/s2, X, Y, Z directions for 3 times
Rating Equivalent to IP65f, Nema #250 Type 4x/13 (Equivalent to NEMA 12 with the addition of “Oil or Spraying and Splashing”) when properly installed in an enclosure
Weight 2 kg [4.4 lb] or less (display unit only)
External Dimensions W272.5 x H214.5 x D57 mm [W10.73 x H8.44 x D2.24 in.]
SD Card Ethernet
24Vdc
VGA
10.4
-inch
Ro
Powered by