Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 203)

GP3000 Series Hardware Manual
8-32
(2) Remove the retaining screws (4) on the rear cover.
(3) Open the rear cover by lifting it vertically.
(4) Place the rear cover with the inner part facing up. Confirm the position of the frame for installing the
Function Expansion Memory.
(5) Insert the Function Expansion Memory at an angle so it’s base plate locks on to the frame’s tabs. While
pushing the Function Expansion Memory in the tab’s direction, connect to the push-in connector.
(6) Verify that the Function Expansion Memory is securely attached to the frame.
• Do not let the attachment screws fall inside the GP, or lose them.
• If the GP interior is hot, it may cause burns. Perform installation of the Function
Expansion Memory once the main body has cooled.
Screws Screws
GP-3400 Series rear view
Frame
GP-3400 Series interior
Function Expansion Memory
1
2