IAI America SCON-C - Manual (Page 162)

144
On installation of AK-04
[1] Use AK-04 in environment where surrounding air temperature is 0 to 40
C.
[2] The temperature of AK-04 increases by approximately 30
C during operation. Do not install multiple AK-04
converters closely or store them within ducts. Moreover, do not set them near other heating elements.
[3] When you use several AK-04 converters, lay them out separated for 10 mm or more.
A recommended installation example is shown below.
 Make the cable length between the host controller and pulse converter as short as possible.
 Keep pulse converters separated for 10 mm or more from each other.
Host
controller
Wiring length: 50 mm or less is recommended.
10 mm or more
10 mm or more
If such layout cannot be
avoided, keep the wiring
length with the host
controller minimum.