Command/response table for sis commands, Programming guide – Extron Electronics MTPX Plus 6400 Series User Guide User Manual
Page 78
Command
ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Create ties
NOTES: • The matrix switchers support 1- and 2-digit numeric entries (1*1 and 02*02).
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&3*03%.
• The quick multiple tie and tie input to all output commands activate all I/O switches simultaneously.
• The ! tie command, & tie command, and % tie command can be used interchangeably.
• The ! tie all command, & tie all command, and % tie all command can be used interchangeably.
Tie input
X!
to output
X@
,
video (V) and audio (A)
X!
*
X@
!
Out
X@
•
In
X!
•
All
]
Tie the video and audio for input
X!
to output
X@
.
Example:
1*3!
Out03
•
In01
•
All
]
Tie input 1 video and audio to output 3.
Tie input
X!
to output
X@
,
RGB (video) only
X!
*
X@
&
Out
X@
•
In
X!
•
RGB
]
Tie the video for input
X!
to output
X@
. Video
is broken away.
Example
(see 4th Note, above):
10*4&
Out04
•
In10
•
RGB
]
Tie input 10 RGB to output 4.
Tie input
X!
to output
X@
,
video only
X!
*
X@
%
Out
X@
•
In
X!
•
Vid
]
Tie the video for input
X!
to output
X@
. Video
is broken away.
Example
(see 4th Note, above):
7*5%
Out05
•
In07
•
Vid
]
Tie input 7 video to output 5.
Tie input
X!
to output
X@
,
audio only
X!
*
X@
$
Out
X@
•
In
X!
•
Aud
]
Tie the audio for input
X!
to output
X@
. Audio
is broken away.
Example:
12*4$
Out04
•
In12
•
Aud
]
Tie input 12 audio to output 4.
Quick multiple tie
E
+Q
X!
*
X@
! ...
X!
*
X@
$
}
Qik
]
Example:
E
+Q3*4!4*5%4*6$
}
Qik
]
Tie input 3 video and audio to output 4,
tie input 4 video to output 5,
and tie input 4 audio to output 6.
Tie input to all outputs,
video and audio
X!
*!
In
X!
•
All
]
Example:
5*!
In05
•
All
]
Tie input 5 video and audio to all outputs.
NOTE: 0*! clears all ties.
Tie input to all outputs,
RGB (video) only
X!
*&
In
X!
•
RGB
]
Video is broken away.
Example
(see 5th Note, above):
8*&
InØ8
•
RGB
]
Tie input 8 RGB to all outputs.
Tie input to all outputs,
video only
X!
*%
In
X!
•
Vid
]
Video is broken away.
Example
(see 5th Note, above):
1Ø*%
In1Ø
•
Vid
]
Tie input 10 video to all outputs.
Tie input to all outputs,
audio only
X!
*$
In
X!
•
Aud
]
Audio is broken away.
Read ties
NOTES: • The ! read tie command for RGB and the % read tie command for video can be used interchangeably.
• When the switcher is in verbose mode 2 or 3, the response is Out
X@
•In
X!
•(All)(RGB) or (Vid)
]
.
Read tied input
X@
!
X!]
Input
X!
video and audio is tied to output
X@
.
Read tied input, RGB output
X@
&
X!]
Input
X!
video is tied to output
X@
.
Read tied input, video
output
X@
%
X!]
Input
X!
video is tied to output
X@
.
Read tied input, audio
output
X@
$
X!]
Input
X!
audio is tied to output
X@
.
Command/Response Table for SIS Commands
NOTE:
X!
= Input number
00 – maximum number of inputs for your matrix size (00 = untied)
X@
= Output number
01 – maximum number of outputs for your matrix size
MTPX Plus 6400 Series Matrix Switchers • Programming Guide
72