Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 144)

Global Presets Page
You can save and recall global presets from the Global presets page (figure 76). Access the
Global presets page by clicking the
Global Presets link on the left of the Control page.
Select I/O Settings
Refresh
Select RS-232 Port Settings
Selct MTPX Configuration
Select an Output Group
for Ties
Select an Output Group
for Picture Settings
Figure 76. Global Presets Page
Saving a preset
Save the current configuration (configuration 0) as a preset as follows:
1. Click the Save Preset button.
2. Select the desired preset by clicking on one of the presets listed. To create a new preset,
click one of the [unassigned] buttons. Overwrite an existing preset by clicking the preset
button for that preset.
3. If desired, rename the preset by typing over the current name in the box adjacent to the
Save Preset button.
NOTES: • Preset names are limited to up to 12 upper and lower case alphanumeric
characters, {space}, _, and / characters.
• The following characters are invalid or not recommended in preset names:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
If you do not rename an unassigned button, the MTPX Plus matrix switcher names the
preset as Preset
{the selected preset number} , “Preset 08,” for example.
If you do not rename an existing preset when it is overwritten, the MTPX Plus matrix
switcher retains the same name.
4. Click the Accept button.
MTPX Plus 6400 Series Matrix Switchers • HTML Operation 138