Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 103)

NOTES: • Editing the Administrator Password field while connected via the
Ethernet port can immediately disconnect the user from the switcher. Extron
recommends editing this field using one of the serial ports and protecting the
Ethernet access to this screen by assigning an administrator’s password to
qualified and knowledgeable personnel only.
• An administrator password must be created before a user password can be
created.
• The following characters are invalid in passwords:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ “ ; : | \ and ?.
Edit either password field as follows:
1. Click in the desired Password field. The pointer tool becomes a text cursor.
2. Edit the case-sensitive password as desired.
3. Press the < Tab > key on the keyboard or click in another field to exit the Password field.
4. Click the Take button to make the password change take effect.
Mail Server IP Address field
The Mail Server IP Address field displays the IP address of the mail server that handles
the e-mail for the facility in which the matrix switcher is installed. Standard IP protocol rules
apply to the mail server IP address.
Edit this field as follows:
1. Click in the Mail Server IP Address field. The pointer tool becomes a text cursor.
2. Edit the IP address as desired.
3. Press the < Tab > key on the keyboard or click in another field to exit the Mail Server
IP Address field.
4. Click the Take button to make the address change take effect.
Mail Server Domain Name field
The Mail Server Domain Name field displays the domain name that the matrix switcher
uses to log on to the e-mail server. Standard domain conventions (such as xxx.com) apply.
NOTE: The following characters are invalid or not recommended in a domain name:
{space} + ~ , = ‘ [ ] { } < > ’ “ “ ; : | \ and ?. The @ character is only
acceptable as the lead-in to the domain name (such as @folklore.net).
Edit this field as follows:
1. Click in the Mail Server Domain Name field. The pointer becomes a text cursor.
2. Edit the name as desired.
3. Press the < Tab > key on the keyboard or click in another field to exit the Mail Server
Domain Name field.
4. Click the Take button to make the name change take effect.
MTPX Plus 6400 Series Matrix Switchers • Matrix Software 97