Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 42)

3. Select video and audio for the tie: Press and release the Video button and the Audio
button as necessary to light both.
I / O
VIDEO AUDIO
O
U
T
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
Until you select an input, the buttons for all untied outputs
light
amber if no video and audio inputs are tied, green
if no video inputs are tied (only audio is tied), or red if
no audio or RS-232 inputs are tied (only video is tied).
Press the Audio button
to toggle on and off.
The button lights red
when selected.
Press the Video button
to toggle on and off.
The button lights
green when selected.
4. Select an input: Press and release the input 5 button.
NOTE: You can also view a set of ties by selecting a tied output. Demonstrate this
as follows:
1 . Note the number of a lit output button, and then press and release the
output button for an untied (unlit or background illumination) output.
2 . Observe that all of the untied outputs light.
3 . Press the output button that you noted previously.
4 . Observe that the selected output button, the tied input button (input 5),
and the output buttons light for all of the outputs that are tied to the
input.
5. Deselect video: Press and release the Video button.
I / O
VIDEO AUDIO
O
U
T
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
Press the button.
The button is unlit or
background illuminated
when deselected. The Audio button
remains lit
red to
indicate that only
audio is selected.
The buttons for outputs that are not tied to Input 5
are either unlit or background illuminated.
The buttons for outputs that are tied to Input 5 light red
to indicate audio or RS-232 ties (audio breakaway).
MTPX Plus 6400 Series Matrix Switchers • Operation 36