Control buttons – Extron Electronics MTPX Plus 6400 Series User Guide User Manual
Page 30

Control Buttons
NOTE: See “
,” later in this chapter for detailed descriptions of
all of the following functions and operations.
Primary functions
Action
Save changes.
Select Preset mode.
Select View mode.
Cancel/escape.
Indication
Blink: save needed
Blink: Save preset
Lit: Recall preset
View mode selected
Flashes once
ENTER
PRESET
VIEW
ESC
Secondary functions
I/O Grouping
Action/
Indication
Select group 1.
Lit: group selected.
Select group 2.
Lit: group selected.
Select group 3.
Lit: group selected.
Select group 4.
Lit: group selected.
Port
configuration
Action 1:
Select Configuration mode
Action 2/
Indication:
Select 9600 baud.
Blink: selected
Select 19200 baud.
Blink: selected
Select 38400 baud.
Blink: selected
Select 115200 baud.
Blink: selected
Front panel
lock
Action
With Video and
Audio buttons,
selects Lock mode 2
or toggles between
mode 0 and mode 2.
Audio
Action:
In Audio mode,
decrease input level
or output volume.
In Audio mode,
increase input level or
output volume.
c
Enter button — The Enter button has three primary functions (
❏
) and four secondary
functions (
•
):
❏
Saves configuration or preset changes that you make on the front panel. To create a
simple configuration:
z
Press the desired input button (
a
).
z
Press the desired output buttons (
b
).
z
Press the Enter button (
c
).
❏
Indicates that a potential tie has been created but not saved.
❏
Indicates that a global preset has been selected to be saved or recalled but that the
preset action has not been accomplished.
z
z
In the I/O Group mode, selects group 1 and indicates the selection.
z
z
With the Preset, View, and Esc buttons, selects Serial Port and Audio and
RS-232 Input Configuration mode.
z
z
Selects 9600 baud for the rear panel Remote port in Serial Port and Audio
and RS-232 Input Configuration mode and indicates the selection.
z
z
With the Video and Audio buttons, selects front panel security Lock mode 2 or
toggles between mode 0 (unlocked) and mode 2.
MTPX Plus 6400 Series Matrix Switchers • Operation
24