beautypg.com

Extron Electronics FOX AEX 108 Setup Guide User Manual

Fox aex 108 • setup guide, Audio r l rx 2 tx, Audio r l rx 3 tx

background image

FOX AEX 108 • Setup Guide

This guide provides instructions for an experienced installer to set up and operate the
Extron FOX AEX 108 fiber audio extractor. The FOX AEX 108 can be installed on the output
side of a fiber matrix providing up to 8 audio extraction points.

NOTE: The FOX AEX 108 is compatible with all Extron FOX products except

for FOX 3G HD-SDI transmitter and receiver products.
Transmission of HDMI video with HDCP content requires two fibers.

Installation

Step 1 Mounting

Turn off or disconnect all equipment power sources and mount the extractor as required.

Step 2 Input and Output Connections

a.

Connect the fiber output (OUT) of the matrix to the Rx port of an extraction point on
the FOX AEX 108.

b.

Connect the Tx port of the same extraction point to the FOX receiver (Rx).

c.

Connect the Tx port of the FOX receiver to the Rx port of the matrix for optional
bidirectional RS-232 communication.

d.

Insert a 3.5 mm, 5-pole captive screw audio connector into the audio connector of the
extraction point on the FOX AEX 108.

Do not tin the wires!

Balanced Audio Output

Tip

Ring

Tip

Ring

Sleeves

Unbalanced Audio Output

Tip

No Ground Here

No Ground Here

Tip

Sleeves

LR

LR

Step 3 Power

Plug a standard IEC power cord into the connector to connect the FOX AEX 108 to a 120 V
or 240 VAC, 50 or 60 Hz power source. All LEDs will blink together once for a multimode
model and twice for a singlemode model.

100-240V ~ 0.3A Max.

50/60 Hz

AUDIO R

L

Rx

1

Tx

+ -

-

+

AUDIO R

L

Rx

2

Tx

+ -

-

+

AUDIO R

L

Rx

3

Tx

+ -

-

+

AUDIO R

L

Rx

4

Tx

+ -

-

+

AUDIO R

L

Rx

5

Tx

+ -

-

+

AUDIO R

L

Rx

6

Tx

+ -

-

+

AUDIO R

L

Rx

7

Tx

+ -

-

+

AUDIO R

L

Rx

8

Tx

+ -

-

+

1

2

FIBER OPTIC

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

FIBER OPTIC

3

4

ADDRESS

5

6

7

8

SMX 88 FOX

FOXBOX Rx DVI Plus

Local 2-ch Audio Output

Video/Audio/RS-232

Video/Audio/RS-232

RS-232 (optional)

FOX AEX 108

FOXBOX Rx HDMI

12V
1.0A MAX

POWER

LINK

OPTICAL

Rx

Tx

LINK

HDMI AUDIO

HDMI

AUDIO

OUTPUTS

OFF

ON

REMOTE

RS-232

Tx Rx G

RS-232

OVER FIBER ALARM

Tx Rx G 1 2

L

R

FOXBOX Rx HDMI

FOX AEX 108 • Setup Guide

This guide provides instructions for an experienced installer to set up and operate the
Extron

FOX AEX 108 fiber audio extractor. The FOX AEX 108 can be installed on the output

side of a fiber matrix providing up to 8 audio extraction points.

NOTE: The FOX AEX 108 is compatible with all Extron FOX products except

for FOX 3G HD-SDI transmitter and receiver products.
Transmission of HDMI video with HDCP content requires two fibers.

Installation

Step 1 Mounting

Turn off or disconnect all equipment power sources and mount the extractor as required.

Step 2 Input and Output Connections

a.

Connect the fiber output (OUT) of the matrix to the Rx port of an extraction point on
the FOX AEX 108.

b.

Connect the Tx port of the same extraction point to the FOX receiver (Rx).

c.

Connect the Tx port of the FOX receiver to the Rx port of the matrix for optional
bidirectional RS-232 communication.

d.

Insert a 3.5 mm, 5-pole captive screw audio connector into the audio connector of the
extraction point on the FOX AEX 108.

Do not tin the wires!

Balanced Audio Output

Tip

Ring

Tip

Ring

Sleeves

Unbalanced Audio Output

Tip

No Ground Here

No Ground Here

Tip

Sleeves

LR

LR

Step 3 Power

Plug a standard IEC power cord into the connector to connect the FOX AEX 108 to a 120 V
or 240 VAC, 50 or 60 Hz power source. All LEDs will blink together once for a multimode
model and twice for a singlemode model.

100-240V ~ 0.3A Max.

50/60 Hz

AUDIO R

L

Rx

1

Tx

+ -

-

+

AUDIO R

L

Rx

2

Tx

+ -

-

+

AUDIO R

L

Rx

3

Tx

+ -

-

+

AUDIO R

L

Rx

4

Tx

+ -

-

+

AUDIO R

L

Rx

5

Tx

+ -

-

+

AUDIO R

L

Rx

6

Tx

+ -

-

+

AUDIO R

L

Rx

7

Tx

+ -

-

+

AUDIO R

L

Rx

8

Tx

+ -

-

+

1

2

FIBER OPTIC

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

OUT

IN

FIBER OPTIC

3

4

ADDRESS

5

6

7

8

SMX 88 FOX

FOXBOX Rx DVI Plus

Local 2-ch Audio Output

Video/Audio/RS-232

Video/Audio/RS-232

RS-232 (optional)

FOX AEX 108

FOXBOX Rx HDMI

12V
1.0A MAX

POWER

LINK

OPTICAL

Rx

Tx

LINK

HDMI AUDIO

HDMI

AUDIO

OUTPUTS

OFF

ON

REMOTE

RS-232

Tx Rx G

RS-232

OVER FIBER ALARM

Tx Rx G 1 2

L

R

FOXBOX Rx HDMI