Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 129)

Passwords Page
Access the Passwords page (see figure 62) by clicking the Passwords link on the System
Settings page.
Refresh
Select System Settings
Select Firmware Upgrade
Select Email Settings
Figure 62. Passwords Page
NOTE: If the switcher is password protected, fields on this page can be edited only by
people logged in as administrators.
The fields on the Passwords page are for entering and verifying administrator and user
passwords. Passwords are case sensitive and are limited to 12 upper-case and lower-case
alphanumeric characters. Each password must be entered twice: once in the
Password
field and then again in the Re-enter Password field. Characters in these fields are
masked by asterisks (*****). If you do not want to password protect an access level, leave
the
Password field and the Re-Enter Password field blank. After entering the desired
password in both fields, click the Submit button.
NOTE: An administrator password must be created before a user password can be
created.
To clear an existing password so that no password is required, enter a single space character
in the
Password and Re-enter Password fields, and click the Submit button.
MTPX Plus 6400 Series Matrix Switchers • HTML Operation 123