beautypg.com

I/o buttons, Buttons – Extron Electronics MTPX Plus 6400 Series User Guide User Manual

Page 32

background image

I/O Buttons

NOTE: See “

Front Panel Operations

,” later in this chapter for detailed descriptions of

all of the following functions and operations.

Primary functions

Action

Select video.

Select audio.

Indication

Green when selected

Red when selected

VIDEO

AUDIO

Secondary functions

Front panel
locks

Action 1:

With Enter, select Lock mode 2 or toggle

between mode 0 and mode 2.

Action 2:

Select Lock mode 1 or toggle between

mode 2 and mode 1.

Resets

Action:

Perform a system reset

Port
configuration

Action/
indication:

Select RS-232.
Blink: selected

Select RS-422.
Blink: selected

Audio

Action/
indication:

Select Audio mode.

Blinks red.

g

Video button — The Video button has one primary function (

) and four secondary

functions (•):

Selects and deselects video for a configuration that is being created or viewed and

lights green to indicate that video is available for configuring or for viewing.

z

z

With the Enter button and Audio button, selects between front panel locks (Lock
mode 2 and Lock mode 0).

z

z

With the Audio button, selects between front panel locks (Lock mode 2 and Lock
mode 1).

z

z

With the Audio button, initiates the system reset.

z

z

Selects the RS-232 protocol for the rear panel Remote port in Serial Port and

Audio and RS-232 Input Configuration mode and indicates the selection.

h

Audio button — The Audio button has one primary function (

) and five secondary

functions (•):

Selects and deselects audio for a configuration that is being created or viewed and

lights to indicate that audio is available for configuration or viewing.

z

z

Selects the Audio mode, in which you can adjust the input audio level and the
output audio volume.

z

z

With the Enter button and Video button, selects between front panel locks (Lock
mode 2 and Lock mode 0).

z

z

With the Video button, selects between front panel locks (Lock mode 2 and Lock
mode 1).

z

z

With the Video button, initiates the system reset.

z

z

Selects the RS-422 protocol for the rear panel Remote port in Serial Port and

Audio and RS-232 Input Configuration mode and indicates the selection.

MTPX Plus 6400 Series Matrix Switchers • Operation

26