Programming guide, Local control ports – Extron Electronics MTPX Plus 6400 Series User Guide User Manual
Page 71
Programming
Guide
This section describes the operation of the MTPX Plus Matrix Switchers using the Simple
Instruction Set, including:
z
z
z
z
Ethernet (LAN) Port
z
z
z
z
z
z
z
z
Using the Command/Response Tables
z
z
Local Control Ports
The switcher has two local ports that can be directly connected to a host device such as a
computer running the Extron DataViewer utility or the HyperTerminal utility, or a control
system. These ports make remote control of the switcher possible using a direct connection.
The local ports are:
z
z
The rear panel Remote (RS-232 or RS-422) port, a 9-pin D female connector
z
z
The front panel Configuration port, a mini USB B port
NOTE: These two ports are independent of one another. A front panel Configuration
port connection and a rear panel Remote port connection can both be active at
the same time.
MTPX Plus 6400 Series Matrix Switchers • Programming Guide
65