Html operation, Opening the embedded web pages – Extron Electronics MTPX Plus 6400 Series User Guide User Manual
Page 123

HTML Operation
This section describes the operation of the MTPX Plus matrix switcher, including:
z
z
Opening the Embedded Web Pages
z
z
z
z
z
z
z
z
z
z
The switcher can be controlled and operated through its LAN port, connected via a LAN or WAN,
using a web browser such as Microsoft® Internet Explorer®. The browser display of the
status or operation of the switcher has the appearance of web pages. This section describes the
factory-installed HTML pages, which are always available and cannot be erased or overwritten.
NOTE: If the Ethernet connection to the matrix switcher is unstable, try turning off the
proxy server in the web browser. In Internet Explorer, click
Tools
>
Internet
Options
>
Connections
>
LAN Settings
, uncheck the
Use a proxy
server...
box, and then click
OK
.
Opening the Embedded Web Pages
Access the switcher using HTML pages as follows:
1.
Start the web browser program.
2.
Click in the
Address
field of the browser.
3.
Enter the matrix IP address in the
Address
field of the browser.
NOTE: If the local system administrators have not changed the value, the factory-
specified default, 192.168.254.254, is the correct value for this field.
4.
If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (/) and the name of the file to open.
NOTES: • The
Address
field of the browser should display the address in the
following format:
xxx.xxx.xxx.xxx
/{
optional_file_name.html
}.
• The following characters are invalid in file names:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ “ ; : | \ and ?.
MTPX Plus 6400 Series Matrix Switchers • HTML Operation 117
117