Master-reset selection, Using emulation mode – Extron Electronics MTPX Plus 6400 Series User Guide User Manual
Page 116

Master-Reset selection
Master reset performs all of the following functions:
z
z
Clears all ties
z
z
Clears all presets
z
z
Clears all rooms
z
z
Clears all audio or RS-232 mutes
z
z
Resets all I/O grouping
z
z
Sets all input audio levels to unity gain (+0 dB)
z
z
Sets all output volume levels to 100% (0 dB of attenuation)
NOTE: Master reset does not reset the Internet protocol (IP) settings.
Using Emulation Mode
Emulation mode allows you to set up the software without connecting the switcher. Use
emulation mode as follows:
1.
Click
Start
>
Programs
>
Extron Electronics
>
Matrix Switchers
>
MATRIX Switcher + Control Pgm
.
The Comm Port Selection window (see figure 52) appears.
Figure 52.
Comm Port Selection Window
2.
Choose
Emulate
, and click
OK
.
3.
Choose an emulation file to open, and click
OK
. The file DEMO.MTX provides a sample
of a completed matrix setup. Selecting the file NEW.INI or clicking
Cancel
provides a
blank setup window to get you started.
4.
Enter the file name under which you want to save any changes to the file, and click
OK
.
MTPX Plus 6400 Series Matrix Switchers • Matrix Software 110