Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 160)

Reference
Information
This section discusses the specifications, part numbers, and accessories for the
MTPX Plus 6400 Series Matrix Switchers. Topics that are covered include:
z z
Specifications
z z Part Numbers
Specifications
Video
Routing
MTPX Plus 4848 ...................... 48 x 48 matrix, 8 x 4 local
MTPX Plus 4864 ...................... 48 x 64 matrix, 8 x 4 local
MTPX Plus 6432 ...................... 64 x 32 matrix, 8 x 4 local
MTPX Plus 6448 ...................... 64 x 48 matrix, 8 x 4 local
MTPX Plus 6464 ...................... 64 x 64 matrix, 8 x 4 local
Gain ............................................... Unity ±1 dB
Crosstalk ........................................ -80 dB @ 1 MHz, -70 dB @ 10 MHz, -60 dB @ 30 MHz, -50 dB @ 100 MHz
Switching speed ............................. 200 ms (max.)
Video input — local
Number/signal type ........................ 8 analog RGBHV, RGBS, RGsB, RsGsBs, component video (bi-level and tri-level),
S-video, composite video
Connectors .................................... 8 female 15-pin HD
Nominal level ................................. 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels .............. Analog: 0.3 V to 1.45 Vp-p with no offset at unity gain
Impedance ..................................... 75 ohms ±5%
Horizontal frequency ...................... 15 kHz to 130 kHz
Vertical frequency ........................... 30 Hz to 150 Hz
Return loss ..................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ............. 250 mV
Video input — main (see transmitters' output specifications)
Number/signal type ........................ 48 or 64 proprietary analog signals
Connectors .................................... 48 or 64 female RJ-45 connectors
MTPX Plus 6400 Series Matrix Switchers • Reference Information 154 154