Extron Electronics MTPX Plus 6400 Series User Guide - Manual (Page 16)

EDID Minder — Captures and stored EDID information, continuously making it available to
all local inputs. EDID minder has two operating modes:
z z Automatic (default) — Captures EDID for displays connected to the local outputs and
provides data to the appropriate local inputs.
z z
User Assigned Mode — Rates from EDID table can be selected and assigned to any
input. EDID file for the display connected to output 1 can be stored in the EDID table
(four user-assigned locations are available).
Upgradeable firmware — The firmware that controls all switcher operations can be
upgraded in the field via either serial port, without taking the switcher out of service.
Firmware upgrades are available for download on the Extron website,
www.extron.com ,
and can be installed using the control program.
Labeling — The Extron button label software is shipped with every Extron matrix switcher.
You can create labels to place above the front panel input buttons and below the output
buttons, with names, alphanumeric characters, or color bitmaps for easy and intuitive input
and output selection. Alternatively, labels can be made with any Brother
® P-Touch™ or
comparable labeler.
Global presets — 64 global presets are a time-saving feature that lets you set up and store
input/output configurations in advance. You can then recall those configurations, when
needed, with a few simple steps on the front panel.
Rack mounting — The 10U high enclosure has mounting flanges that make it rack
mountable in any conventional 19-inch wide wide rack without extra hardware.
Three front panel security lockout modes (Executive modes) — If a matrix switcher is
installed in an open area, where operation by unauthorized personnel may be a problem,
either of two security lockout modes can be implemented (the third mode is unlocked).
When a front panel lockout mode is enabled, a special button combination or SIS command
is required to unlock the front panel controls and make the front panel fully operational.
Power — The 100 VAC to 240 VAC internal power supplies provides worldwide power
compatibility.
MTPX Plus 6400 Series Matrix Switchers • Introduction 10