Dst start date option (3.0 and later), Dst end date option (3.0 and later), Service info menu (syntax = dvb) – TANDBERG E5714 User Manual
Page 99: Overview, Network name option, Service provider option, Service name option, Syntax option, Si level option, 3 service info menu (syntax = dvb)
Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page 4-21
ST.TM.E10076.3
DST Start Date Option (3.0 and later)
To access the DST Start Date (Daylight Saving Time) option, press the
DST Start Date softkey in the Service Info Menu. This option allows the
Daylight Saving Time Start Date to be changed.
DST End Date Option (3.0 and later)
To access the DST End Date (Daylight Saving Time) option, press the DST
End Date softkey in the Service Info Menu. This option allows the
Daylight Saving Time End Date to be changed.
4.7.3
Service Info Menu (Syntax = DVB)
Overview
The Service Info Menu is selected from the System Menu by pressing the
Service Info softkey. This menu provides options for configuring the
Service Information (SI) parameters transmitted in the output transport
stream. See Figure 4.9 for the menu structure when the Syntax option has
been set to DVB.
Network Name Option
To access the Network Name option, press the Network Name softkey in
the Service Info Menu. This option allows the network name to be
changed. The information is included in the Network Information Table
(NIT).
Service Provider Option
To access the Service Provider option press the Service Provider softkey
in the Service Info Menu. This option allows the service provider name
to be changed. The information is included in the Service Description Table
(SDT).
Service Name Option
To access the Service Name option press the Service Name softkey in the
Service Info Menu
. This option allows the service name to be changed.
The information is included in the SDT.
Syntax Option
To access the Syntax option for the output Transport Stream and
associated SI/PSIP, press the Syntax softkey in the Service Info Menu.
See Syntax Option, page 4-19 for details.
SI Level Option
To access the SI Level option, press the SI Level softkey in the Service
Info Menu
. This enables the service information level to be specified. Use
the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them.