Dc power input, Physical details, B.6 physical details – TANDBERG E5714 User Manual
Page 252: B.5.2 dc power input
Technical Specification
Page B-16
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
B.5.2
DC Power Input
The power unit used in the Encoder is a soft-start type designed for use on
dc supplies having a negative or positive earth (vehicle chassis) voltage
supply in the range 12 to 36 Vdc.
Table B.26: DC Power Supply Specification
Item
Specification
Rated Voltage:
12– 36 Vdc supplies only. Correct polarity must always be observed.
(This is the voltage required at the DC INPUT connector when the unit is powered on)
Rated Current:
4 A at 36 V rising to 12 A at 12 V.
Input Connector:
3 pin Jaeger plug
Power Consumption (On)
7.7 A at 12 V reducing to 2.8 A at 36 V
Power Consumption (Stand-by)
45 mA at 12 V rising to 150 mA at 36 V
B.6
Physical Details
Table B.27: Physical Details
Item
Specification
Height
1U, 44.5 mm chassis
2U, 88.9 mm chassis
Width
1U, 442.5 mm excluding fixing brackets
2U, 442.5 mm excluding fixing brackets
Overall width
1U, 482.6 mm including fixing brackets
2U, 482.6 mm including fixing brackets
Depth
1U, 545 mm excluding rear connector clearance
2U, 545 mm excluding rear connector clearance
Approximate weight
1U, 7.5 kg (16.5 lbs)
2U, 11.5 kg (25.3 lbs)