Load active config option, Store active config option, Load configs from backup option – TANDBERG E5714 User Manual
Page 200: Store configs in backup option, 9 load active config option, 10 store active config option, 11 load configs from backup option, 12 store configs in backup option
Operating the Equipment Locally
Page 4-122
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
This menu provides options for loading and storing predefined
configurations and updating and restoring backup configurations.
4.17.9 Load Active Config Option
To access the Load Active Config option, press the Load Active Config
softkey in the Config Menu. Use the softkeys to select the required
configuration to be loaded. See Annex C, Predefined User Configurations
for details of predefined configurations.
4.17.10 Store Active Config Option
To access the Store Active Config option, press the Store Active Config
softkey in the Config Menu. Use the softkeys to select the position where
the configuration is to be stored.
NOTE…
There is no confirmation screen, the configuration is overwritten immediately the softkey indicating the
storage position is selected.
4.17.11 Load Configs From Backup Option
This option enables the 16 user configurations to be overwritten with the
16 backup configurations. To update the backup configurations press the
Load Configs from Backup softkey in the Config Menu.
NOTE…
The 16 backup configurations are loaded immediately the Load Configs from Backup softkey is
pressed although the current Encoder configuration remains unchanged.
4.17.12 Store Configs in Backup Option
This enables the 16 user configurations to be stored in the backup, and
may be password protected. Press the Store Configs in Backup softkey
in the Config Menu.
NOTE…
The 16 backup configurations are stored immediately the Store Configs in Backup softkey is
pressed.
Press the Cfgs softkey
for quick access to the
Config menu