TANDBERG E5714 - Manual (Page 130)

Operating the Equipment Locally
Page 4-52 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
4.9 Audio Menu
4.9.1 Overview
The Audio Menu is selected from the Setup Menu by pressing the Audio
softkey. This menu permits the selection of audio parameters. Any option
with a clear circle next to it cannot be accessed and changed. It is for
status information only (see Figure 4.15 for menu structure).
Although a full list of menu options are given, it depends upon the Coding
Standard selected as to which are shown on the front panel display.
4.9.2 Audio A and B Menus
Introduction
Audio A and B have the same menu options, depending upon the Coding
Standard selected. Audio A Menus are shown as examples. The Audio A
Menu
is selected from the Audio Menu by pressing the Audio A softkey.
This menu permits the selection of individual channel audio parameters.
Figure 4.14: Setting up the Audio Input
E57xx Encoder
Test Tone
1 kHz, 0 dB
SDI Video
Analogue A/Digital A
Analogue B/Digital B
Setup/Audio
Coding Standard
Option
Audio In
SDI De-embedded 1
SDI De-embedded 2
SDI De-embedded 3
SDI De-embedded 4
Empty
Packets
–
∞
dB
Encoding
Setup/Audio
Source Option
Setup/Audio
Coding Mode
Option
Encoding
MPEG Layer 2
Dolby Digital (AC-3) Mono
Stereo
etc
Set up the Audio in this sequence