beautypg.com

Environmental conditions, Compliance, Safety – TANDBERG E5714 User Manual

Page 253: B.7 environmental conditions, B.8 compliance, B.8.1 safety

background image

Technical Specification

Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder

Page B-17

ST.TM.E10076.3

B.7

Environmental Conditions

Table B.28: Environmental Specification

Item

Specification

Operational

Temperature

-10

°C to +50°C (14°F to 122°F) ambient with free air-flow

Over temperature alarm
generated at

>= 55°C

Under temperature alarm
generated at

< 0°C

Temperature checked

Once every 30 seconds

All fans switched off at

< 10°C (when set to auto)

Half the fans switched off at

< 20°C (when set to auto)

All fans on at

>= 20°C (when set to auto)

Relative humidity

0% to 90% (non-condensing)

Cooling requirements

Front section: Cool air input from front panel, exhaust from right side of unit
Rear section: Cool air input from right side of unit, exhaust from left side of unit
See Chapter 2, Installing the Equipment, Figure 2.2

Handling/movement

Designed for stationary or fixed use when in operation

Storage/Transportation

Temperature

-20

°C to +70°C (-4°F to 158°F)

Relative humidity

0% to 90% (non-condensing)

B.8

Compliance

1

B.8.1

Safety

This equipment has been designed and tested to meet the requirements of

the following:

EN 60950

European

Safety of information technology equipment

including business equipment.

IEC 60950

International

Safety of information technology equipment

including business equipment.

In addition, the equipment has been designed to meet the following:

UL 1950

USA

Safety of information technology equipment

including business equipment.

1

The version of the standards shown is that applicable at the time of manufacture.

This manual is related to the following products: