Satellite modulator if output (e5714 and e5740 if), If out (main), If out (monitor) – TANDBERG E5714 User Manual
Page 47: Satellite modulator l-band output (e5740 lband), L-band in
Installing the Equipment
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page 2-19
ST.TM.E10076.3
2.6.10 Satellite Modulator IF Output (E5714 and E5740 IF)
IF Out (Main)
75 W BNC socket provides an IF output.
Table 2.13: IF Out Connector (Main)
Item
Specification
Connector type
BNC 75
W Female
Type
Analogue
Connector designation
IF OUT MAIN
Pin-outs
Centre
Screen
IF Output
Ground
IF Out (Monitor)
75 W BNC socket provides an IF output used for
monitoring.
Table 2.14: IF Output Connector (Monitor)
Item
Specification
Connector type
BNC 75
W Female
Type
Analogue
Connector designations
IF OUT MONITOR
Pin-outs
Centre
Screen
IF Output
Ground
2.6.11 Satellite Modulator L-Band Output (E5740 LBAND)
L-Band In
50 W SMA female connector provides an L-band input to
allow another L-band signal to be summed with the
modulator output.
Table 2.15: L-band In Connector
Item
Specification
Connector Type
50
W SMA Female
Type
Analogue
Connector designation
L-Band In
Pin-outs
Centre
Signal
Screen
Ground