Polarisation option, L-band output option, L-band power option – TANDBERG E5714 User Manual
Page 161
Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page 4-83
ST.TM.E10076.3
Polarisation Option
To access the Polarisation option, press the Polarisation softkey in the
Satellite Modulator Menu
.
This enables the polarisation of the satellite transponder to be specified.
Table 4.101: Polarisation Options
Selected Option
Description
Linear - Horizontal
Satellite transponder uses linear horizontal polarisation.
Linear - Vertical
Satellite transponder uses linear vertical polarisation.
Circular - Left
Satellite transponder uses circular left polarisation.
Circular - Right
Satellite transponder uses circular right polarisation.
Status Only Options for the Satellite Modulator Menu
The following options are status only and cannot be changed. They give
information about the Baseband (BB) Card.
·
Baseband (BB) Card Option
·
BB PCB Revision Option
·
BB Mod Status Option
·
BB Serial No. Option
·
BB S/W Release Option
·
BB CPLD F/W Release Option
·
BB DSP F/W Release Option
·
BB RNF F/W Release Option
·
IF Card Type Option
·
DPC Card Type Option
4.11.9 Output Format = Satellite Modulator
(L-Band Output) (3.1 and later)
L-Band Output Option
To access the L-Band Output option, press the L-Band Output softkey in
the
Satellite Modulator Menu
. This enables the L-Band output to be
switched On or Off.
L-Band Power Option
To access the L-Band Power option press the L-Band Power softkey in
the
Satellite Modulator Menu
.
Table 4.102: L-Band Power Options
Valid Input Range
Description
Min:
Max:
-20.0 dBm
+5.0 dBm