M2/eom2/satdemod, 16qam demodulator card option, M2/eom2/ip, ip output card option – TANDBERG E5714 User Manual
Page 263
Technical Specification
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page B-27
ST.TM.E10076.3
B.10.7 M2/EOM2/SATDEMOD, 16QAM Demodulator Card
Option
NOTE…
The M2/EOM2/SATDEMOD, 16QAM Demodulator Card Option is supported by Encoder software
version 3.1 and later.
Table B.44: L-band Inputs (16QAM Demodulator)
Item
Specification
Safety Status:
SELV
Connector Type:
F-type Female
Connector Designation:
L-Band Input 1, L-Band Input 2
Input Impedance:
75
W
Input Power (maximum):
-25 dBm
Capture Range:
Up to ± 3.5 MHz
Signal Type:
QPSK as per EN 300 421 (DVB-S)
BPSK/16QAM as per EN 301 210 (DVB-DSNG) (option)
Symbol Rate:
1 – 45 Msym/s
B.10.8 M2/EOM2/IP, IP Output Card Option
NOTE…
The M2/EOM2/IP, IP Output Card Option is supported by Encoder software version 3.1 and later.
Table B.45: Ethernet Port (IP Output Card)
Item
Specification
Safety Status:
SELV
Connector Type:
8-way RJ-45
Connector Designation:
10/100 BT
Signal Type:
10/100-baseT Ethernet (IEEE 802.3/802.3u)
Transport Stream Rate:
Up to 50 Mbit/s