TANDBERG E5714 - Manual (Page 75)

Options and Upgrades
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-25
ST.TM.E10076.3
3.10.2 Assembly
Rear Panel
L-Band Inputs
Two 75 W F-type female connectors provide L-band
inputs.
Table 3.20: L-Band Input Connector
Item Specification
Connector Type 75 W F-type Female
Connector designation L-Band Input 1, L-Band Input 2
Pin-outs Centre Signal
Screen Ground
3.11 IP Output Card (M2/EOM2/IP)
3.11.1 Overview
The IP Output card provides a 10/100 BaseT Ethernet port, out of which
the transport stream generated by the Encoder can be output in UDP
packets at up to 50 Mbit/s.
The mapping of MPEG-2 transport stream packets into IP data frames is
done according to the protocol stack shown in Figure 3.8.
Figure 3.8: IP Output Protocol Stack
MPEG-2/DVB Layer
UDP – User Datagram Protocol TCP/UDP
Transport Layer - IP
Link Layer – 10/100-baseT Ethernet
MPEG- 2
Transport
Stream