Ird demod menu, Frequency option, Symbol rate option – TANDBERG E5714 User Manual
Page 185: Fec rate option, 4 ird demod menu
Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page 4-107
ST.TM.E10076.3
4.14.4 IRD Demod Menu
Frequency Option
To access the Frequency option, press the Frequency softkey in the IRD
Demod Menu
.
This value is either the L-Band frequency for the demodulator to tune to if
the LNB option is set to ‘Direct RF’, or it is the satellite frequency to tune
to if the LNB option is set to ‘Active’.
If the demodulator is M2/EOM2/QPSKDEMOD, and the IF input is selected,
then this value is the IF frequency to tune to.
Symbol Rate Option
To access the Symbol Rate option, press the Symbol Rate softkey in the
IRD Demod Menu
. If the IRD is in tracking mode then this value is tied to
that set for the satellite modulator, and cannot be altered.
Table 4.134: Symbol Rate Options
Valid Input Range
Description
Min (Low Sym Rate)
0.3000 Msym/s
Minimum with low symbol rate option M2/ES02/LSYM
Min
1.0000 Msym/s
Max
30.0000 Msym/s
Stepsize
0.0001 Msym/s
FEC Rate Option
To access the FEC Rate option, press the FEC Rate softkey in the
IRD
Demod Menu
. If the IRD is in tracking mode this value is tied to that set for
the satellite modulator, and cannot be altered.
Table 4.135: FEC Rate Options
Selected Option
Description
1/2
IRD uses 1/2 FEC Rate
2/3
IRD uses 2/3 FEC Rate
3/4
IRD uses 3/4 FEC Rate
5/6
IRD uses 5/6 FEC Rate
7/8
IRD uses 7/8 FEC Rate
8/9
IRD uses 8/9 FEC Rate - only applicable if the modulation type is 8PSK