TANDBERG E5714 - Manual (Page 101)

Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-23
ST.TM.E10076.3
Transport Stream Id Option
To access the Transport Stream Id option, press the Transport Stream
Id softkey in the Service Info Menu. This enables the Transport Stream
Identity to be specified. Use the + and – softkeys to scroll through the
options and then press the Enter softkey after selecting one of them. The
information is included in the PAT, SDT and NIT.
NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Table 4.8: Transport Stream Id Options
Selected Option Description
Min: 0
Max: 65535
Step Size: 1
Transport stream identity
number.
Service Type Option (3.0 and later)
To access the Service Type option, press the Service Type softkey in the
Service Info Menu
. This option allows the Service Type to be changed.
PMT PID Option
To access the PMT PID option, press the PMT PID softkey in the Service
Info Menu
. This shows the Program Map Table Packet Identifier. Use the +
and – softkeys to scroll through the options and then press the Enter
softkey after selecting one of them.
Table 4.9: PMT PID Options
Selected Option Description
Min: 32
Max: 8190 (1FFEh)
Step Size: 1
Program Map Table Packet
Identifier (PMT PID).
Dolby AC-3 Descriptor Option (3.0 and later)
To access the Dolby AC-3 Descriptor option, press the Dolby AC-3
Descriptor softkey in the Service Info Menu.
This allows a user to specify only the DVB, only the ATSC, or both the
ATSC and DVB descriptors for use with audio streams.
It is necessary because the ATSC descriptor existed prior to the DVB
descriptor and some Decoders (e.g. early Alteias) used the AC-3 descriptor
for identifying Dolby Digital AC-3 streams.
Use the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them.
NOTE…
This is only applicable to DVB.