TANDBERG E5714 - Manual (Page 97)

Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-19
ST.TM.E10076.3
4.7.2 Service Info Menu (Syntax = ATSC 1 )
Overview
The Service Info Menu is selected from the System Menu by pressing the
Service Info softkey. This menu provides options for configuring the
Service Information (SI) parameters transmitted in the output transport
stream.
See Figure 4.9 for the menu structure when the Syntax option has been
set to ATSC.
Short Channel Name Option
This is associated with the field short_name and is a seven character name
for the channel. To access the Short Channel Name option, press the
Short Channel Name softkey in the Service Info Menu. This option
allows the Short Channel name to be changed. The information is included
in the Virtual Channel Table (VCT).
Long Channel Name Option
This is associated with the field extended_channel_name and gives the full
name of the channel. To access the Long Channel Name option press the
Long Channel Name softkey in the Service Info Menu.
Syntax Option
To access the Syntax option for the output Transport Stream and
associated SI/PSIP, press the Syntax softkey in the Service Info Menu.
This enables the syntax to be specified. Use the + and – softkeys to scroll
through the options and then press the Enter softkey after selecting one
of them.
Table 4.2: Syntax Options
Selected Option Description Comments
ATSC Advanced Television Standards Committee.
DVB Digital Video Broadcasting. See page 4-21
SI Level Option
To access the SI Level option, press the SI Level softkey in the Service
Info Menu
. This enables the service information level to be specified. Use
the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them.
1 For further information refer to ATSC Standard Doc A/65 Program and System Information Protocol for Terrestrial
Broadcast and Cable - Annex D.