TANDBERG E5714 - Manual (Page 13)

Introduction to the Basic Encoder
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 1-5
ST.TM.E10076.3
Information Label
There are two information labels which identify the configuration of the
unit. Figure 1.3 and Figure 1.4 are typical examples.
Figure 1.3: Information Label 1
Figure 1.4: Information Label 2
Hardware Configuration
Each piece of hardware has a specific reference number. These are linked
to give a hardware configuration number (see Figure 1.3) for the whole
unit. The first part of the number refers to the enclosure and any modules
forming part of the basic unit, and each subsequent part of the number
refers to an option module. Refer to Chapter 3, Options and Upgrades for
the possible positions of each option module.
Build Revision
The build revision refers to the physical status of the enclosure and any
option modules at the time the equipment was shipped from the factory. It
is NOT the same as the Build version, which relates to software and
firmware.
1.2 Role of the Encoder in a System
1.2.1 Typical System
The Encoder is a transportable digital exciter designed specifically for
mobile contribution applications. It is compact and lightweight, fully
MPEG-2 and DVB or ATSC compliant and has high performance for the
transmission of studio-quality video material. The equipment is designed to
be suitable for both flyaway use (within an appropriate flight case) and
truck installation.
Encoder
Serial No . NNN
E10076_XX _XX _XX _XX_XX_XX
M2/VOY/E5740
Serial Number
A unique number for unit identification
Hardware Configuration
A reference which identifies each
piece of hardware in the equipment
Marketing Code
A code which identifies the product
for marketing purposes
Evolution 5000 Encoder
Serial No . NNN
E10076_XX _XX _XX _XX_XX_XX
M2/VOY/E5740
Bar Code
Used for unit identification in the
manufacturing process
Product Name
A name which identifies the type of
product.