TANDBERG E5714 - Manual (Page 100)

Operating the Equipment Locally
Page 4-22 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
Table 4.5: SI Level Options
Selected Option Description
PAT/PMT/CAT only Program Association Table/ Program
Map Table/ Conditional Access Table.
PAT/PMT only Program Association Table/ Program
Map Table.
Off
On
On (No EIT)
Network Id Option
To access the Network Id option, press the Network Id softkey in the
Service Info Menu
. This enables the Network Identity to be specified.
Use the + and – softkeys to scroll through the options and then press the
Enter softkey after selecting one of them. The information is included in
the NIT.
NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Table 4.6: Network Id Options
Selected Option Description
Min: 0
Max: 65535
Step Size: 1
Network identity number.
Service Id Option
This option ties the SDT to the PMT and is the same as the Program
Number in ATSC. To access the Service Id option, press the Service Id
softkey in the Service Info Menu. This enables the Service Identity to be
specified. Use the + and – softkeys to scroll through the options and then
press the Enter softkey after selecting one of them. The information is
included in the PAT, PMT, SDT, EIT and NIT.
NOTE…
This option is not displayed if the unit is set to generate PSIP externally or it is under MEM control.
Table 4.7: Service Id Options
Selected Option Description
Min: 0
Max: 65535
Step Size: 1
Network identity number.