Boards in the basic encoder, 5 boards in the basic encoder – TANDBERG E5714 User Manual
Page 27
Introduction to the Basic Encoder
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page 1-19
ST.TM.E10076.3
Figure 1.13: E5750 (2U) Rear Panel Component Parts and Connectors
1.4.5
Boards in the Basic Encoder
The basic Encoder contains two boards mounted horizontally in the
enclosure (see Table 1.8). Option modules can be fitted in the remaining
slots (see Equipment Models on page 1-3 and Chapter 3, Options and
Upgrades).
Table 1.8: Boards in the Basic Encoder
Model Number
Card
E5714
S11171 Encoder Base Board
S12376 Tuneable QPSK Modulator
E5715
S11171 Encoder Base Board
S12524 OFDM Modulator
E5740-IF
S11171 Encoder Base Board
S10872 70/140 MHz Satellite Modulator
E5740-LBAND
S11171 Encoder Base Board
S12695 L-Band Satellite Modulator
E5750
S11171 Encoder Base Board
S12524 OFDM Modulator
Access to the modules or boards in the basic Encoder is not required for
normal operation and may invalidate the warranty.
Option Slot 1
Option Slot 4
Option Slot 5
Option Slot 3
Option Slot 1-3
Audio In and
Audio
Reference Out
H Sync
Composite
Video
ASI
Outputs
RS-232
Data
RS-422
Data
Alarm
RS-232/
RS-485
Control
SDI In
Ethernet
Option Slots 4-5
Base Board
IF OUT 1
Option Slot 2
IF OUT 2