Introduction, 525/625 line default settings, General default settings – TANDBERG E5714 User Manual
Page 267: C.1 introduction, C.3 general default settings
Predefined User Configurations
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
Page C-3
ST.TM.E10076.3
C.1
Introduction
There are sixteen predefined user configurations. These are a quick and
easy way to configure the Encoder without having to enter individual
parameters.
C.2
525/625 Line Default Settings
Table C.1: 525/625 Line Default Settings
Lines
Frame Rate
GOP Length
525
29.97 Hz
15
625
25 Hz
12
C.3
General Default Settings
The Encoder parameters and default settings are as shown in Table C.2.
Table C.2: Default Configuration Settings
Module
Parameter
Default Value
System:
UTC Offset
0
Config Name
Config Name
Screen Saver
Off
Screen Saver Delay
300 s
Key Beeper
On
Power Dip Recovery
Off
Fan Control
Auto (Temp. Controlled)
Service Name
Default Service
Service Provider
Service Provider
Network Name
TANDBERG
Syntax
DVB
Network Id
0xFFFF
Service Id
1
Transport Stream Id
1
PMT PID
0x20
ATSC Program
2
SI Level
On (DVB compliant)
PSIP Source (ATSC)
BNC 1
PSIP Min PID
0x1FD0
PSIP Max PID
0x1FFE
Logical Channel Descriptor
Off
Logical Channel
1
Logical Channel Descriptor Id
0x83