TANDBERG E5714 - Manual (Page 69)

Options and Upgrades
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-19
ST.TM.E10076.3
NOTES…
1.
Pre-encoded signals cannot be reconstructed on the analogue outputs.
2. Pre-encoded signals will raise an alarm on the digital output.
Figure 3.7: XLR Expander Card Option (M2/EOM2/XLR)
The XLR Expander Card option comprises Assembly S12556 and Card
S12557. See Table 3.1 for the slots that it can be installed in.
Audio In Connector
Two XLR female connectors provide a stereo
pair. Each connector carries a single channel
of an analogue stereo pair.
Digital audio is carried on the
left connector.
Table 3.9: Audio In L AES/EBU Connector
XLR IN L, AES/EBU
Pin Analogue Digital
1 Screen Screen
2 Channel (+) AES/EBU (+)
3 Channel (-) AES/EBU (-)
Nominal input
impedance 600 W or 20 kW 110 W
Table 3.10: Audio In R Connector
XLR IN R
Pin Analogue Digital
1 Screen
2 Channel (+)
Not available
3 Channel (-)
Nominal input
impedance 600 W or 20 kW
Audio In L Audio In R
AES/EBU
PUSH P
U
1 2
3
1 2
3
Analogue /AES_EBU Left
(Balanced)
Analogue Right
(Balanced)
XLR Expander Card Option
Tx Processor
Analogue /AES_EBU Left
(Balanced)
Analogue Right
(Balanced)
To Encoder
Rx Processor
4 x AES_EBU (Embedded)
Decoder x 2
Off